These photos and videos show you how easy it is to get your Ice Booze set up and ready for your party!
Assembling the Ice Mold
Step 1: Attach tubes to the lower nipples
Step 2: Press tubes into top slots
Step 3: Assemble mold pieces together
Step 4: Slide clamps over shell
Step 5: Use Allen wrench to tighten bolts
Step 6: Fill to first water line. Freeze completely. Repeat freezing process for second and third water line.
Removing the Ice Block
Best Results:
Remove the Ice Booze mold from the freezer and place the unit in a water safe area (i.e kitchen sink or bathtub) for about an hour. The mold will get a heavy layer of frost on the outside. As the luge warms up the condensation will melt. This indicates the ice is ready to be removed from the mold. First pull the hoses out: they should come out with very little effort. Second, remove the side brackets and last, remove the shell.
